Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Boulder City Homeowners
Wood floors in Boulder City take a beating that has nothing to do with heavy traffic. This is high desert country, dry most of the year, and the same low humidity that feels pleasant in July is what pulls moisture out of a wood floor through the heating season. Boards shrink, gaps open at the seams, and a finish that looked fine two summers ago starts to look chalky and dull. That chalky finish is usually the first real sign the floor needs attention, and refinishing is how you deal with it before the wood itself gets damaged.
We carry flooring in Boulder City across carpet, tile, and hardwood, and refinishing is the service that lets an existing wood floor skip replacement entirely. Our technicians have up to 11 years of experience reading finish wear, wood thickness, and how a floor has been maintained, which is what decides whether a screen and recoat will do the job or the floor needs a full sand. Estimates are free, the price is written down before any work starts, and we’re licensed and insured. Call (833) 842-8455 and we’ll book your in-home measure and estimate.
Same-day estimates are often possible when you call early. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Hardwood Floor Refinishing Service Includes
Refinishing is not one job, it’s a family of jobs that sit on a scale from light touch-up to full restoration. Which one your floor needs depends on how deep the wear goes. Here’s how we break it down.
Hardwood Floor Sanding
Sanding removes the old finish and a thin layer of the wood surface so a new finish has clean, raw wood to bond to. You need it when the finish is worn through in traffic lanes, when there are deep scratches, or when a previous finish has started to peel or flake in patches. We sand in stages with progressively finer grits and keep the machine moving evenly so the floor comes out flat, with no swirl marks left behind for the new finish to highlight. It’s also the step where we find out how much wood is actually left above the tongue, and that’s a conversation we have with you before we go further.

Hardwood Floor Staining
Staining changes the color of the wood, whether you’re going darker, lighter, or just correcting an uneven tone left by sun exposure and old furniture placement. You need it when the floor has faded unevenly, when a previous stain has gone patchy, or when you’re updating a room and the current color no longer fits. We test stain on a small area of your actual floor before committing to the whole room, because the same stain on oak and on maple can land in two very different places. What we can’t promise is an exact match to a sample swatch, since the wood’s own grain and age are part of the result.

Hardwood Floor Restoration
Restoration is the full treatment for a floor that’s been neglected, water-damaged in spots, or covered by carpet for years. You need it when boards are cupped, when there are stains that sanding alone won’t lift, or when the floor has been refinished so many times the wood is getting thin. We assess board by board, replace individual damaged pieces where we can source a reasonable match, and then sand and finish the whole floor so the repair disappears into the field. Not every floor can be restored. Thickness and condition decide that, and we check both at the estimate visit.

Hardwood Floor Buffing
Buffing is a light abrasion of the existing finish, followed by a fresh coat, without cutting down to bare wood. You need it when the finish is dull but still intact, when there are light surface scuffs, or when a floor just looks tired. We screen the surface evenly and apply a compatible coat so the new layer bonds instead of sitting on top and peeling later. It’s a quicker, less invasive option than a full sand, but it only works if there’s enough finish left to work with, and that’s something we check in person.
Screen and Recoat Hardwood Floors
Screen and recoat is the maintenance step that keeps a healthy floor healthy, done before wear reaches the wood. You need it when the finish is scuffed but not worn through, and when you want to reset the floor without the dust and time of a full sand. We screen the finish, clean the surface thoroughly, and apply a new coat that bonds to what’s there. If the old finish is a different product type than the new coat, we’ll say so, because that mismatch is where recoats fail.
Stair Refinishing
Stairs wear differently from the field of a floor: treads take concentrated traffic in the middle, risers get kicked, and handrails and balusters make the sanding slower and more detailed. You need stair refinishing when the treads are worn through in the center, when the stairs creak and the finish has cracked, or when the whole staircase no longer matches a refinished floor below. We sand and finish treads, risers, and rails together so the staircase reads as one piece instead of a patchwork, and we work carefully around spindles rather than removing them.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
Finishing products matter as much as the wood underneath them. We work with Shaw and Armstrong finishes and systems on hardwood installations and refinishing, and we know how each one behaves in a dry climate: how fast it sets, how it builds, and where a second coat needs a little more patience than the label suggests. That knowledge is what keeps a recoat from looking streaky. When a floor is a mix of old wood and a newer patch, matching the finish system to what’s already there is often the difference between a seamless result and an obvious repair line.
For homeowners thinking about the whole room rather than just the wood, we also carry Daltile and Karndean for tile and luxury vinyl, so a refinish in one room can be paired with a tile entryway or a vinyl plank basement without bringing in a second contractor. We don’t sell samples by mail and we’re not a showroom; what we do is install and finish the floor you choose, and we’ll tell you honestly when refinishing is the smarter spend versus replacement. Whether you have Shaw, Armstrong, or any other make of hardwood, we can help.
Signs You Need Hardwood Floor Refinishing Right Now
- The finish has gone dull and chalky. When a floor no longer reflects light the way it used to, the topcoat has worn thin. That’s the cheapest moment to refinish, because the wood underneath is still protected.
- You’re seeing scratches that catch a fingernail. Light surface scuffs buff out; scratches deep enough to feel have gone through the finish into the wood. Left alone, those spots collect dirt and moisture and spread.
- Gaps are opening between boards. Some seasonal movement is normal in a dry climate, but widening gaps let spills and grit down into the seams. Refinishing won’t close the gaps, but it’s the moment to have the floor evaluated before the wood splits.
- There are dark stains or gray patches. Darkening usually means moisture has reached the wood, and gray patches point to a finish that’s failed in that area. Both need assessment before you decide between refinishing and replacing boards.
- You’ve just pulled up carpet. Floors under carpet are often in better shape than expected, or they’ve been stained unevenly by the old backing. Either way, a sand and finish resets the whole room at once.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Free in-home measure and estimate. We walk the floor with you, check finish wear and board condition, and look for signs of moisture problems under the surface. We measure the actual square footage and talk through options: buff, screen and recoat, or full sand. You get a written estimate, and the written estimate is what sets the final price.
- 2
Pre-job prep and protection. We seal off doorways and cover adjacent surfaces before any machine comes in. Furniture gets moved or we coordinate with you on it, and we talk through dust control up front so there are no surprises.
- 3
Sanding and repair. We sand in progressive grits, working evenly across the whole floor. During this stage we identify boards that need replacing and handle small repairs so the finished field reads as one surface. This is also where we confirm how much wood thickness is left to work with.
- 4
Stain and finish application. We test stain on a small area of your floor before the full application. Finish goes down in coats, with proper dry time between them, and the schedule is set by the product instructions and the conditions in the room, not by a calendar promise.
- 5
Final walkthrough and care guidance. We inspect the floor with you under good light, point out anything worth noting, and explain how to clean and protect the new finish. The schedule for the install is set at the estimate, so you know how the job fits your week before we begin.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Boulder City?
Hardwood floor refinishing in Boulder City typically runs $1,800 – $5,000 for a project in the 500 to 800 square foot range, with the written estimate setting the final price. That’s the installed number covering both labor and finish materials, and it’s the same range whether we’re working on a single room or a whole main level of similar size. As a starting point, refinishing runs from about $3 per square foot, and the actual per-square-foot figure depends on the product, the room, and the subfloor.
What moves the number: whether it’s a buff and recoat or a full sand down to bare wood, the condition of the boards underneath, how many individual pieces need replacing, and how much detail work is involved around stairs, thresholds, and tight corners. Stair refinishing is priced on its own because treads and rails take far more time per square foot than an open floor. None of that is guesswork once we’ve seen the floor.
How to avoid overpaying is simpler than it sounds: get the scope in writing, and make sure the estimate says whether it’s a recoat or a full sand, how many finish coats are included, and how repairs are handled. A price that doesn’t spell out the scope is the one that grows later. Our free estimate includes a written quote with that scope spelled out, plus a straight answer on whether refinishing is worth it for your particular floor or whether replacement makes more sense. Call (833) 842-8455 to schedule yours.
Hardwood Floor Refinishing Near Boulder City – Our Service Area
We work with homeowners across the Boulder City area, including Henderson and Whitney, and out toward Paradise, Enterprise, and the Las Vegas valley. Living in a desert climate means scheduling a refinish around the dry season makes a real difference, and we’ll talk through timing when we quote. Booked install days are scheduled at the estimate, so you’ll know exactly when your project fits. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Boulder City
Hardwood floor refinishing is the process of sanding away the old, worn finish and applying a new one to restore the look and protection of the wood. It can range from a light screen and recoat to a full sand down to bare wood, depending on how deep the wear goes. It’s a cost-effective alternative to full replacement when the wood itself is still sound. Our estimate visit is where we confirm which level your floor needs. Call (833) 842-8455 for a free estimate.
The timeline depends on the scope: a screen and recoat is far quicker than a full sand, and finish drying time depends on the product and the conditions in the room. We don’t promise a fixed number of days over the phone, because the product instructions and your home’s conditions set the schedule. What we do promise is that the schedule is set in writing at the estimate, so you can plan around it. Call (833) 842-8455 and we’ll talk through timing for your floor.
Typical hardwood floor refinishing in Boulder City runs $1,800 – $5,000 for a 500 to 800 square foot project, with the written estimate setting the final price. Starting per-square-foot pricing is from about $3, and the actual rate depends on the product, the room, and the subfloor. Stair refinishing and board repairs are quoted based on what we find. Call (833) 842-8455 for an exact quote. Estimates are free.
Yes, we work with Shaw hardwood, along with Armstrong and any other make of wood floor. The brand matters less than the condition of the wood and the existing finish, and we check both at the estimate. If your floor is a brand we don’t stock, we’ll still tell you honestly what it needs. Call (833) 842-8455 to book your free measure.
Same-day estimates are often possible when you call early, though refinishing itself is a scheduled job, not a same-day drop-in. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (833) 842-8455 to get on the schedule.
We don’t state a warranty term here because the finish manufacturer’s coverage and the written estimate are what govern it. What we will do is put the scope in writing so you know exactly what’s covered and how it’s handled. The best protection for a fresh finish is proper cleaning and a screen and recoat down the road, and we’ll explain how. Call (833) 842-8455 and we’ll walk you through the details.
Clear the room of furniture and personal items and remove anything from the walls that could be affected by dust, and plan to stay off the floor during finish drying. Make sure we can access the area with equipment, and tell us about any pets or kids so we can plan the workspace. Once we’ve seen the floor, we’ll give you a specific prep list. Call (833) 842-8455 to schedule your estimate.
Schedule Your Hardwood Floor Refinishing Service in Boulder City Today
If your hardwood is dull, scratched, or just past its prime, refinishing is often the smarter spend over replacement, and the sooner you address it the more wood you save. We’ll come out, measure the room, look at the floor honestly, and give you a written estimate with no obligation. Licensed and insured, with technicians who have up to 11 years of experience. Call (833) 842-8455. We answer 24/7.
Written by the team at Flooring Boulder City.