Porcelain tile
Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Tile Flooring Installation for Boulder City Homeowners
Tile is supposed to be the floor you stop thinking about once it’s down. When it isn’t, the problem usually shows up in one of three ways: a hollow knock under a few tiles, grout lines that keep cracking open in the same spot, or a floor that looks dated while the tiles themselves are still solid. Each one points to a different job, and the fix is rarely the same. Our technicians have up to 11 years of experience reading those signals before a single tile comes up, so the diagnosis comes before the quote. We install porcelain, ceramic, large format tile, and bathroom floors from brands like Daltile and Shaw, and we remove old flooring and regrout existing tile when replacement isn’t necessary. Same-day service is available, we’re licensed and insured, and estimates are free. Call (833) 842-8455 to schedule one.
What Our Tile Flooring Installation Service Includes
Tile work covers a wider range of jobs than most homeowners expect. Here’s what each one actually involves in a Boulder City home.
Porcelain Tile Installation
Porcelain is the workhorse of tile flooring: dense, fired at high temperatures, and a good fit for entryways, kitchens, and anywhere foot traffic runs high. You need it when you want a hard surface that handles desert dust tracked in from outside and won’t swell when it meets a damp mop. We install porcelain from Daltile and other lines, matching the tile density to the room’s use and setting it over a subfloor we’ve checked for flatness and movement first. Where the old floor was, we make sure the transition to adjoining rooms is level and clean.

Bathroom Floor Tile Installation
Bathroom floors need more than a pretty surface – they get wet, they get stepped on barefoot, and they usually sit on a smaller, cut-up subfloor with a toilet flange in the way. This is the right job when a bathroom remodel reaches the floor, or when a vinyl or carpeted bathroom floor has reached the end of its usefulness. We handle cutting around fixtures, keeping tile lines square to the room’s walls rather than to the doorway, and accounting for the slope that keeps water moving toward the drain.

Large Format Tile Installation
Large format means bigger tile panels with fewer grout joints – a cleaner, more open look, and less grout to keep clean over time. It’s the right call for open living areas and modern renovations where the tile itself should read as the finish, not just the background. Big tile is harder to set than small tile, because any dip in the subfloor shows up as a lippage edge you can feel underfoot. We check subfloor flatness and use the right bonding approach so the panels sit dead flat across the field.

Ceramic Tile Floor Installation
Ceramic is the more traditional, more cost-friendly cousin of porcelain, and it’s a solid choice for lower-traffic rooms, laundry areas, and patterned designs where you want color and shape more than maximum density. You’d choose it when the budget matters or when the pattern you want is easier to find in ceramic. We install ceramic with grout and spacing matched to the tile and the room, and we walk you through where ceramic makes sense versus where porcelain earns its price.
Tile Removal
Tile removal is the demolition stage: taking out the old floor, old thinset, and any underlayment so the new installation starts on a clean base. You need it whenever the new tile won’t sit at the right height over the old floor, or when the existing tile is failing at the bond. We take out the old surface, assess what’s underneath, and tell you honestly whether the subfloor is sound enough to build on or needs repair before anything new goes down.
Tile Regrouting
Regrouting replaces the grout between tiles while leaving the tiles themselves in place – a much smaller job than a full replacement when the tile is still solid and only the joints have worn, cracked, or stained past cleaning. It’s the right option when the tile is bonded well but the floor looks tired because of the lines between it. We remove the old grout, clean the joints, and apply fresh grout so the floor reads as a single surface again, not a grid of worn grooves.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Tile Flooring Installation
We work with Daltile, a North American tile manufacturer whose porcelain and ceramic lines cover everything from plain field tile to designed decorative patterns. Daltile gives residential rooms access to products also specified for commercial projects, which matters in a hallway or kitchen where the floor has to survive real use. We know how Daltile’s tile sizes and trims fit together, so the layout works out without awkward cut pieces at the walls. Shaw’s tile lines round out the selection when a homeowner wants floor and finish styled together across a whole room.
We also install Karndean, whose luxury vinyl art tile is a different animal from ceramic and porcelain – it’s a resilient floor with designer-grade patterning and commercial-spec durability, useful in bathrooms and basements where a softer, warmer surface underfoot is the goal. Armstrong offers another path for homeowners comparing hard and resilient options side by side. Whether you have Daltile, Shaw, Karndean, Armstrong, or any other make, we can help. We install and service the tile you choose, and we tell you what each option will actually do in Boulder City’s dry heat and hard water.
Signs You Need Tile Flooring Installation Right Now
- Hollow or loose tiles. Tap across the floor and listen for a dull, hollow sound instead of a solid click. That usually means the tile has separated from the thinset below, and a loose tile will eventually crack or lift at the edge.
- Cracked or crumbling grout. Grout that keeps breaking along the same line is telling you the floor is moving underneath it. Left alone, water finds that crack and works its way into the subfloor.
- Tiles that rock when you step on them. A tile that flexes underfoot has lost its bond, and the movement spreads to its neighbors. It’s a small repair now and a bigger one once the tile breaks.
- Stains that don’t come out of the grout. Dark grout lines that stay dark after cleaning mean the grout has absorbed what’s been spilled or tracked in. Regrouting restores the look without tearing out sound tile.
- A floor that’s worn out visually but structurally fine. If the tile is solid but the color, size, or pattern no longer fits the room, replacement is a design decision – and the right time to plan it is before the rest of the renovation is finished.
Our Tile Flooring Installation Process – Step by Step
- 1
Free in-home measure and estimate. We measure the room, check the subfloor for flatness and movement, and look at what’s under the existing floor. You get a written estimate with the price set before any work starts, so there are no surprises later. We walk you through product choices from Daltile, Shaw, and other lines so the material fits the room’s use.
- 2
Planning the layout. We lay out the tile pattern on paper and on the floor before setting anything, working from the room’s center lines so cut pieces land at the edges rather than in the middle of the floor. This is where large format jobs get their clean, continuous look.
- 3
Removal and subfloor prep. Old flooring, thinset, and underlayment come out, and we assess what’s underneath. A flat, sound subfloor is the difference between tile that lasts and tile that cracks, so we don’t skip this step to save a day.
- 4
Installation. Tile goes down with the right bonding approach for the material, spacing set for the grout lines you chose, and level transitions planned into adjoining rooms. We keep the work area contained and clean as we go.
- 5
Grouting, sealing, and walk-through. Grout goes in, the floor gets cleaned, and we walk the finished job with you before we leave. Any concerns get handled on the spot, not scheduled for a callback.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tile Flooring Installation Cost in Boulder City?
Tile flooring installation in Boulder City typically runs $3000 – $9000 for a 500 to 800 square foot project, materials and labor included. That’s the lead range for this page, and it’s a typical estimate – the written estimate you get after the in-home measure sets the final price. Tile starts at about $7 per square foot, and the per-square-foot figure depends on the product, the room, and the subfloor. Porcelain and large format tile sit at the upper end because the material costs more and the setting is more demanding. Bathroom floor tile is smaller in area but often carries more detail work around the toilet and drain, which affects the total. Tile removal adds to the job when the old floor has to come out first, and regrouting is a much smaller line item than a full replacement.
To avoid overpaying, ask for a written estimate that separates material from labor and names the tile line and the subfloor prep included. A quote that’s vague on prep is the one that grows. Our free estimate includes the measure, the subfloor check, and a clear written price. Call (833) 842-8455 for an exact quote – estimates are free.
Tile Flooring Installation Near Boulder City – Our Service Area
We work with homeowners across Boulder City and the surrounding valley, including Henderson, Whitney, Paradise, Enterprise, Winchester, Sunrise Manor, Spring Valley, Summerlin, North Las Vegas, and Las Vegas. Response times vary by location and by the day’s schedule, and the free estimate visit is booked around your availability. You can read more about how we handle tile flooring installation in neighboring areas, or start with an overview of our flooring Boulder City services. We also cover tile flooring installation for Whitney homeowners.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Tile Flooring Installation in Boulder City
Tile flooring installation is the process of setting ceramic, porcelain, or large format tile over a prepared subfloor, then grouting the joints to finish the surface. It covers removal of the old floor when needed, subfloor preparation, layout planning, setting the tile, and grouting. Our technicians have up to 11 years of experience matching the right tile and the right setting method to each room. Call (833) 842-8455 to talk through your project.
We don’t give a number of days up front because the schedule depends on the room, the tile, and what’s under the old floor – the estimate visit is where the timeline gets set. A bathroom floor and a large open living area are very different jobs, and a subfloor that needs repair adds a stage before tile goes down. You’ll get a clear schedule with your written estimate. Call (833) 842-8455 to book the free measure.
Tile flooring installation in Boulder City typically costs $3000 – $9000 for a 500 to 800 square foot project, installed, with tile starting at about $7 per square foot. The final figure depends on the tile line, the room layout, the subfloor condition, and whether the old floor has to be removed first. The written estimate sets the price, and there’s no extra charge for the measure or the quote. Call (833) 842-8455 for an exact quote – estimates are free.
Yes, we install Daltile porcelain and ceramic tile and work with their sizes and trims so the layout comes out clean. We also install Shaw, Karndean, and Armstrong products alongside the tile lines. We’re not a dealer or a showroom – we install the floor you choose and stand behind the workmanship. Whether you have Daltile or any other make, we can help.
Same-day service is available, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Saturday is closed. If you call outside dispatch hours, we book you into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 842-8455 and we’ll get your estimate on the schedule.
Warranty terms depend on the product and the job, so we don’t quote a term over the phone – the written estimate spells out what’s covered. Manufacturer terms for the tile come from the brand, and our scope is the installation itself. We walk through both with you before the work is booked. Call (833) 842-8455 to review the details on your project.
Clear the room of furniture and breakables and plan for the floor to be out of use while the work is booked. We’ll tell you at the estimate what needs to move and what we handle, including appliances and fixtures. If the old floor is coming out, we’ll walk through what to expect in terms of dust and access. Call (833) 842-8455 to schedule your free estimate.
Schedule Your Tile Flooring Installation Service in Boulder City Today
If your tile floor has loose tiles, failing grout, or a look that no longer fits the room, the first step is a free in-home measure and a written estimate. Our technicians have up to 11 years of experience, we’re licensed and insured, and the written price sets the final cost before any work begins. Call (833) 842-8455. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. There’s no obligation – just a clear price and a plan for the floor.
Written by the team at Flooring Boulder City.